GSO IEC 60534-8-3:2015
Gulf Standard
Current Edition
·
Approved on
03 September 2015
·
Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method
GSO IEC 60534-8-3:2015 Files
No files are available for this standard right now!
You can buy this standard from any member store
GSO IEC 60534-8-3:2015 Scope
This part of IEC 60534 establishes a theoretical method to predict the external soundpressure
level generated in a control valve and within adjacent pipe expanders by the flow
of compressible fluids.
This method considers only single-phase dry gases and vapours and is based on the perfect
gas laws.
This standard addresses only the noise generated by aerodynamic processes in valves and
in the connected piping. It does not consider any noise generated by reflections from
external surfaces or internally by pipe fittings, mechanical vibrations, unstable flow patterns
and other unpredictable behaviour.
It is assumed that the downstream piping is straight for a length of at least 2 m from the
point where the noise measurement is made.
This method is valid only for steel and steel alloy pipes (see Equations (21) and (23) in 5.5).
The method is applicable to the following single-stage valves: globe (straight pattern and
angle pattern), butterfly, rotary plug (eccentric, spherical), ball, and valves with cage trims.
Specifically excluded are the full bore ball valves where the product FpC exceeds 50 % of
the rated flow coefficient.
For limitations on special low noise trims not covered by this standard, see Clause 8. When
the Mach number in the valve outlet exceeds 0,3 for standard trim or 0,2 for low noise trim,
the procedure in Clause 7 is used
Best Sellers From Electrical Sector
GSO 2530:2016
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 34:2007
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
GSO 35:2007
Gulf Standard
Methods of test
for lead-acid starter batteries used for motor vehicles
and internal combustion engines
GSO 2693:2022
Gulf Standard
The GCC Terrestrial Radio Receiver Specifications for AM/FM/T-DAB+
Recently Published from Electrical Sector
GSO IEC 63296-1:2024
IEC 63296-1:2021
Gulf Standard
Portable multimedia equipment - Determination of battery duration - Part 1: Powered loudspeaker equipment
GSO IEC 61558-2-4:2024
IEC 61558-2-4:2021
Gulf Standard
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers for general applications
GSO IEC 60335-2-23:2024
IEC 60335-2-23:2016
Gulf Standard
Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care
GSO IEC 63174:2024
IEC 63174:2021
Gulf Standard
Electrically operated toothbrushes - Methods for measuring the performance